The frequency of using T-Cut depends on the condition of your car’s paintwork. Generally, for maintaining brilliant shine and dealing with minor scratches, T-Cut can be used every 3–6 months. After the application, give the T-Cut Solution time to work its magic. Allow the product to penetrate the scratches, and once dry, use a clean microfibre cloth to buff it off, revealing your car’s refreshed original shine. Tips for Effective Use The T in Tcut stands for “ Tetrosyl Cutting Oil ”. How T-Cut works What is the car scratch remover good for?

Next comes the application. Working in a circular motion, rub the solution over the scratched area, applying firmly to ensure it gets into the grooves of the damage (especially with coloured T Cut). In many cases, the cloth changes colour as the top layer of paint is removed. Don’t worry, that is perfectly normal although it is not the case with metallic finishes as the lacquer on these is clear. Whether you’re contending with the rigours of daily commuting or the fallout of a minor mishap, maintaining the integrity of your car’s vehicle paintwork can pose quite the challenge. Over time, cosmetic damage, such as minor scratches and minor marks, can detract from your vehicle’s appearance. Thankfully, the T-Cut Solution can help restore your car’s former glory. What is T-Cut?The first thing to remember when “T-Cutting” a car is to ensure the paint is completely clean and dry, otherwise, you run the risk of damaging the paintwork when you start polishing it down. Cleaning the surface of your car is incredibly easy and can be done by either running the entire car through a car wash, or thoroughly cleaning and drying the car by hand. From T-Cut Rapid Scratch Remover for light scratches to T-Cut Metallic Colour Restorer for metallic paintwork, the selection is abundant. Choose the one that matches your specific vehicle needs. Safety First

Since the top, protective layer has been removed, the car now needs to be waxed on a regular basis to prevent corrosion. Waxing is a vital step to remember, as the last thing you want to do, when removing damage from a car, leaves it vulnerable to more damage at a later date. Avoidable errors can hinder the effectiveness of T-Cut or even result in additional damage to the paintwork. One common mistake is applying T-Cut on unsuitable surfaces, such as matte finishes or non-metallic paintwork, leading to discoloration or accidental damage. Another error is impatience, where the product isn’t given sufficient time to penetrate the scratches before it’s buffed off. Know Your Surface Not all surfaces are made equal. T-Cut Solution works best on metal surfaces and paintwork with a glossy finish. Using it on matte paint finishes or non-metallic paintwork can cause more harm than good. Time is of the Essence ChipsAway specialists are experts in car scratch repair. We have a unique and fully mobile paint matching system they use means that, not only are you removing the scratch, but repainting it with the correct, precisely mixed colour and finishing it with the same lacquer seal as before. As this process restores the damaged area, there is no need for time-consuming waxing afterwards.Regardless of what type of car paintwork you have, T-cut can be used. For some additional uses, it is suitable for our boats, caravans and around the housework. How To Use T-Cut Correctly Step 4: After rubbing until the scratch is no longer visible. You should use a second clean microfibre cloth to wipe away any remaining solution.

When using T-Cut, safety should be your priority. Always ensure you’re in a well-ventilated area and wear gloves to protect your skin. Common Mistakes to Avoid T-Cut Polish – Removes surface oxidation, minor scratches and blemishes, whilst providing a shiny finish to your paintwork. Have you found a few scratches on your paintwork that you’re itching to get removed, but don’t have the time or confidence to do yourself? Get in touch with Bodyteq today for a free estimate.If You Are Inexperienced With Repairs: You need some idea of what you are doing, as a simple mistake like using the wrong type of cloth, or using one that had accidentally fallen to the ground, can cause more harm than good. Furthermore, knowing when to stop rubbing the T-Cut on the scratch is essential, as overdoing it after the scratch is removed, could result in you revealing the metal beneath the paint. Most of the common incidents which can scratch your car, such as scraping along a low wall, kerb, brushing again another car or through an act vandalism (e.g. when cars are “keyed”) leave marks that are too deep for T-Cut to fix.

Step 1: An important action to ensure you carry out, is to thoroughly clean and dry the area of paint you are applying the T-Cut to, or else it could potentially damage the paintwork. Remember, T-Cut is not an instant fix. It requires time to penetrate the scratches and start the cleaning process. Frequently Asked Questions about Using T-Cut It is also for this reason that it is important to follow the instructions precisely when using T-Cut. When used as a one-off, T-Cut is generally speaking relatively harmless to your car; however, Since T-Cut removes the very top layer of paint from the surface of the car around the scratch, persistent use can wear the paint of your car thin. How To Prepare Your Car for T Cut Have you ever walked past your car and done a double-take because you’ve just noticed a scratch? And then you frantically rub over it, hoping it’s just a dirt smudge, but it remains.

Which T-Cut to use?

Step 6: If you feel your whole car needs a paintwork restoration. You would have to ensure you are ready for the lengthy and strenuous task, as each section of your car would need to be treated separately. Also, it would require a more thorough after-care. The whole car would need to be waxed to prevent the paint from dulling.