If you want to cut your board at an angle, you can use the provided adjustable fence to set the angle you want, place the board against that, and push the saw through the wood. I’ve read quite a few comments on social media that were critical of the Crosscut Station. Comments like: In this case, the miter cut would need to be made in two cuts. First, the board would be cut straight to the final length. Then, the board would be cut to the desired angle. Width of the Board You can use the the Crosscut Station to make any cuts you need, and it’s perfect for using on the go.

This means we’ll likely want to upgrade the blade in our circular saw before using it to make cuts with the crosscut station. The Crosscut Station uses adjustable guide rails to perfectly fit your circular saw. These guide rails give you accurate cuts by keeping your circular saw perfectly straight. The pros of the Kreg Crosscut Station are that you can cut any angles you want using a circular saw instead of a miter saw. Don’t rely on the blade included with a circular saw to make clean cuts in plywood. Instead, step up to a carbide-tipped blade with at least 40 teeth.The Crosscut Station is super easy to use. After setting it up, everything will be in place for your first cuts.

Saw blades with more teeth usually produce cleaner cuts. A blade with 40 or more teeth is usually recommended for making crosscuts. Miter cuts are made just like crosscuts. Measure, mark, and position the mark on the same side of the kerf as the section of the workpiece that you want to keep.To get high-quality cuts with a circular saw, a guide is essential. A circular saw is a super handy cutting tool for your DIY projects. It's not a complicated tool - once you understand the parts, the controls, and what they do. Some people think it's difficult to get a straight and accurate cut with a circular saw. you can get great results, though, with the help of a cutting guide like the Rip-Cut, Accu-Cut, or Accu-Cut XL. For example, I recently bought a new circular saw. The saw came with a 24-tooth blade which is not recommended for making clean crosscuts. I upgraded to this blade before I started using the saw with the Crosscut Station. Our Crosscut Station offers a simple and versatile solution to make accurate miter cuts with just a circular saw. It is lighter and more portable than a miter saw, allowing for more time building projects and less time setting up and storing bulky tools. The Crosscut Station makes crosscuts at 90 ° in pieces up to 12" wide. It's also great for making a variety of angle cuts from 0 ° and 90 ° with the adjustable fence. Works with left- and right-hand saws. The Crosscut Station is even compact enough to make it a portable cutting solution when you need accurate crosscuts and angle cuts on the go. Features• Crosscut up to 12" wide (305mm) and make a variety of miter cuts from 0° to 45°