Double sliding rails with linear ball bearings on each rail ensures a perfectly smooth and accurate cut However it’s decently priced, and DIYers, hobbyists, and woodworkers can also get great benefits from this tool Při koupi pokosové pily jsem chtěl stroj do 10-ti tisíc, který by uměl dělat přesné řezy na truhlařinu. Bohužel všechny stroje v této cenové relaci jsou spíše hrubější tesařské práce. Po shlédnutí některých pil přímo na prodejně jsem se rozhodl jít do této Makity. This saw offers a lot of features for a lot of people. However, the manufacturer had professionals in mind when they designed it.

This particular saw can cut a 12″ wide board at 90°– so it’s great for shelving, wide dimensional lumber, plywood (see photo above), etc. Je to bohužel moje první Makita, která mne svým zpracováním zklamala. Konstrukce výrobku je v zásadě fajn, ale vlastní zpracování mnoha detailů je nečekaně mizerné. Uvedu pár příkladů: It does have a bigger footprint due to the standard slide rails than it’s cousin, the Makita LS1019L, but that saw’s features come with a higher price tag (and total weight).

The Makita LS1018 10″ Sliding-Compound-Miter-Saw Review Summary

The DIYer can get a lot out of this saw as it would handle about any home-improvement job you could throw at it. Basically, the same benefits as applied to a contractor, only you may not put as many hours on it. Thestandard (somewhat poor) dust collection is one of the negatives most people notice. However, this has not been a deal killer for anyone that I’ve seen. You can adjust this saw’s miter angle up to 47° left, and 60° right. These are good ranges and should allow you to achieve just about any kind of miter you would need. The Motor This is one of the lightest 10″ sliding compound miter saws. It’s got enough features that there are lighter saws out there, but they still did really good with weight management on thismodel. But for the money, it’s a great saw thatmany people use regularly and highly recommend. I too would recommend this saw if the price is in your range.

Even still it doesn’t perform as good as say the Bosch CM10GD, but it does well enough. Just keep your expectations low and you won’t be disappointed! (seriously though, most miter saws dust collection is a joke) Versatility – this saw handles most jobs – but not all Today I’ll be writing the Makita LS1018 review – This is a high quality, highly rated sliding compound miter, built with the professional user in mind. To ensure the utmost accuracy, Makita have fitted the LS1018LN with a laser guide rail and offer a max bevel range of 45 - 45 º to really get into those intricate cuts. Safety hasn't been neglected as Makita have equipped this saw with an electric brake and a soft start function to minimise the chance of the blade causing injury. Weighing in at 20.6kg this product is surprisingly lightweight and is sold as a single unit. Dosud jsem měl od Makity 3x Made in Japan, 1x Made in USA, 1x Made in England a 1x Made in Bulgaria nebo Romania. Se vším maximální spokojenost. However, with this model, it’s been noted that you get much-improved dust collection performance just by hooking a shop vac to the dust port, in lieu of the bag.

Makita 110V 260mm Slide Compound Mitre Saw Laser LS1018LN /1

This is a 13 amp direct drive motor, with a soft-start feature. This is good for prolonging the life of the saw, and it has another benefit I really like. With the soft start, you have virtually zero chance of board shift on startup. So you end up saving time, and headache, with this feature.