All of the panels are tool-less, and they have this dual peg system where one of the sides on the side panel sits inside the frame and the side panels can actually just hang off the little ledge there while the opposite side has dual pegs making installation super easy.

Some of them are also worried that their engines are not durable because of some technical quality problems, like oil-leaking, wearing, hard starting / Adjustment and so on. Now when I compare the NR200 with the NZXT H1, which has a 140mm all-in-one cooler, the NZXT does run hotter on the CPU, which is understandable, but look at that crazy high GPU temperature. The components used in this build were originally used in a Node 202 build which is why we stuck with the low profile cooler.I then added the fan at the bottom as intake to help with GPU cooling, but that actually couldn’t do anything. Starting with a quick tour around the outside of the chassis, you’ll notice that it’s really not all that exciting, at least as far as aesthetics go. There is more modularity to this case than even those twice it's size and I'm pretty sure I missed some features along the way. This was helped by the fact that the radiator is on a bracket, so you can simply remove it, do all your cables, and put it back in place. That is really the only advantage of getting the NR200P, aside from the tempered glass side panel and the second 120mm top exhaust fan, because the regular NR200 just comes with a single top exhaust.

That would probably take my build time from my usual 3-5 hours (because cables must be perfect) to 1.

I do love Toyan engines, but i have to admit that It's not easy to adjust the carburetor of FS-L200, especially for those who are not familiar with Toyan engines. On the motherboard side of the case, you'll see a removable fan mounting system that allows you to increase intake air from that side by adding up to a pair of 140mm fans or a 240mm radiator for an AIO for your CPU. The bottom of the case has room to mount two 120mm fans, though with a GPU installed, the back fan will be limited to 15mm thick. This engine will be a great gift for the most model engine lovers, especially for those who have 1/8 scale oil-powered RC model cars.