Cheap heat guns are usually quite limited, so they contain only one heat setting – particularly those designed only for stripping paint. Demist headlights – restore headlights from condensation by using a heat gun to evaporate the mist.

Using a Heat Gun to Remove Paint and Varnish | DIY Doctor Using a Heat Gun to Remove Paint and Varnish | DIY Doctor

Drying paint or varnish – 30 to 130°C (but take care as dust particles may be blown on to the paint/varnish). Children, animals and pregnant women shouldn’t be nearby when a heat gun is being used to strip paint, as the fumes emitted by the melting paint could be harmful. They are particularly useful in cable harness manufacturing, where a lot of heat shrink material needs to be applied in an area where there are lots of wires and components that could suffer damage. If the heat gun is only in use occasionally or for simple jobs, it could be worth buying a cheaper one with limited features. It’s also worth considering the shape and size of the heat gun as this impacts the proficiency of handling the tool, which affects comfort and safety. The paint bubbles and blisters as the moisture and air trapped under the paint expand and force the paint to bubble. Do not burn the paint. Simply warm it until the blistering appears. The heat from the heat gun will have warmed the paint so that it is soft. It can then be scrapped away relatively easily.Automatic thermal protection switches off the heating unit if motor overheats for increased protection and long lifetime Air Compressor Filters Accessories & Consumables Air Tools and Accessories Oils & Lubricants Low Noise Compressors The heat gun nozzles are all top-of-the-range and make life easier in all sorts of industries including electronics, flooring, roofing and much more.

Heat Guns STEINEL | Heat Guns

The heat gun should come with an assortment of nozzles for directing the flow of hot air to the working area. You can buy the nozzles separately also but you should make sure that you have the right nozzle for the type of work you are planning to do. Electric Pressure Washers Petrol & Diesel Driven Pressure Washers Hot Pressure Washers Pressure Washer Accessories Detergents, Chemicals and Algicides Pressure Washer Spares Hoses & Accessories Nozzles enable precise working on different jobs. For example to direct the airflow to a specific point, or to keep it away from a window. A lot of different nozzles are available on the market, and some of the most common types are shown here.

STEINEL Welding Nozzle

Before you start work, ensure that the cord is long enough to easily reach the area you’re working in – if it isn’t, plug the heat gun into an extension lead to extend your reach. These larger reflector nozzles are particularly useful for grouping together large groups of wire and applying heat shrink tubing to them all. STEINEL Flat Angled Nozzle Heat guns should always be used carefully around copper pipe work where solder joints have been used or scotch connectors as there is a possibility of melting the solder or weakening the joint. Heat Gun Safety Repairing games consoles – heat guns can be used to solder components on a motherboard. For further information on this topic, see our single board guide. Fact: How hot is a heat gun? Most regular heat guns have a minimum temperature of around 49°C (120°F)

Nozzle (Thawing, Paint, Ø 33.5 x 75 mm Bosch 1x Flat Jet Nozzle (Thawing, Paint, Ø 33.5 x 75 mm

Power switch – it’s normally a dead man switch so that power is turned off when finger pressure is removed, which is a good safety feature as the heat gun stops if it’s accidentally dropped. A smaller adapter, the 50 x 35mm version has a rounded design but performs a similar function to the 85mm adapter. The 50mm nozzle fits HG 2120 E, HG 2220 E and HG 2320 E, HG 2000 E, HG 2300 E and HG 2310 LCD plus the HL 2020 E and HL 1920 E, L 2010 E and HL 1910 E models. STEINEL Perforated Flat Nozzle The higher the wattage of a heat gun, the more powerful (hot) it is and a gun of about 2000W is plenty for the majority of jobs you will need to do around the home. You can use the main nozzle from the heat gun. This allows the heat to come directly from the heat gun without trying to direct it or funneling it. This provides a heat over a wide area, although this will still be concentrated enough to do strip effectively. This is suitable for most DIY applications, so there is often no need to get other nozzles. Reducer nozzle: This is used when you are working on a small area and don’t want the heat from the gun directed over a wide area. As you must not heat a single area for too long this nozzle allows you to heat a smaller area and therefore not over heat the area you are working on. It’s great when you’re working in confined spaces or detailed workSTEINEL’s Sieve Reflector Nozzle is another kind of reflector that is used to give more even temperature and air distribution during heat shrinking. The STEINEL nozzle is designed for STEINEL tools HG 2420 E, HG 2620 E, HG 2520 E, HG 4000 E and HG 2300 EM. STEINEL Surface Nozzle

Heat Guns | Hot Air Guns | Toolstation Heat Guns | Hot Air Guns | Toolstation

GHG 18V-50, GHG 20-60, GHG 20-63, GHG 23-66, GHG 600 CE, GHG 630 DCE, GHG 660 LCD Professional, PHG 630 DCEHeat guns are an inexpensive way to reflow or reattach electronic components which have been soldered together, as well as an effective way to solder copper pipes. Other uses for heat guns