Although the final product and designs that can be seen in the previous steps seem simple, I actually went through multiple versions of each part before achieving the finalized product due to being completely new to the design process and 3D printing. While I originally only had a very basic project consisting of the moon lithophane and a simple light, over the course of the project I improved my original plan by adding a base, cylinder, and LED lights that change color. Again, don't be afraid to improve your project throughout your working process! This overlap is bad for the design, so I got rid of it. Starting from the first edge where the rectangle overlaps, I used the 3 point arc tool to trace the edge of this center hole. Once the arc was done, I deleted the part of the rectangle that covered the hole. Custom Moon Phase By Date Night Light, Personalized night sky by date, Night sky print lamp, One year anniversary gifts for boyfriend

I opened PrusaSlicer again and imported the base, then used the "Place on Face" feature to set it on the hollow part of the base. Using this line, I drew a rectangle to the center hole of the base. The sides should be 62mm and the rectangle should overlap and partly cover the hole. |Anime Night Light, 3D Led Anime Light, Anime Gift, Christmas Anime Gift, Anime Led Light, Anime Lamp, Anime Night Lamp, RGB Remote 16 Colors

I used the Rotate tool to create the hollow base. Make sure the body is the sketch that was drawn in Step 1 and the rotational axis is the y-axis. Keep collections to yourself or inspire other shoppers! Keep in mind that anyone can view public collections—they may also appear in recommendations and other places. |Moon Lamp, LED Light, Rechargable Moon Lamp, Hand Crafted, Moon Light, 16 Colors, Remote Controlled, Nightlight, Bedside Lamp, Large 9” Personalized 3d Photo printed Lunar night Moon Lamp, Wedding Gift, Custom Lunar Moon Lamp Night Light, Custom photo lights, Valentines gift These multicolored wires need to be reconnected to the nearest copper spots. The gel on the light strips needs to be removed for the soldering process, I carefully cut off the protective coat on the light strip off using an Exacto knife. This is the same for the wires, so I cut off the wire-protectors using a wire stripper. Make sure you only cut off enough of both to be able to solder them.

My name is Tiffany Lo, and I made this LED Moon Lithophane in Ms. Berbawy's Principles of Engineering class for my SIDE project. I have always loved space, and I knew that designing a moon lamp would be the perfect project after being inspired by this Moon Lamp. My first step was to create a design for my moon and base. If you are following along, you can skip to the next step if you don't plan on changing any measurements.For safety, I went over the rectangle and made sure that the two points at the bottom are connected to the side. Then I deleted the center construction line and finished the sketch. At these two spots, I made two holes of 3mm diameter and 6mm depth. The settings should be on "simple". Moon Lamp, LED Night Light 3D Printing Moon Light with Remote Control, Moon Light Lamps for kids friends Birthday Gifts, gift for girl & boy You can also adjust the brightness of the light at all colors by long pressing the button at the bottom.