One of my pet peeves is someone other than myself opening a new appliance, tool or product and misplacing the attachments. I knew if I positioned the door slider attachment beyond this line, the door wouldn't close properly. Will suit floor to loft floor heights up to 2850mm – can also be cut down easily to suit your specific floor height But because we could still open the doors, however awkwardly, we never treated this as a priority. More Fitting a Kitchen Projects

Then predrilled shallow holes about 2mm deep, also using a 2mm drill bit with a combi drill. I followed on with screwing the plate on with the screws provided. HERE'S HOW THE 2ND FREEZER DOOR SLIDER ATTACHMENT LATCHES ON Then I covered the exposed screws with the other cover that comes in the intregrated fridge freezer sliding door kit. NOW YOU CAN CLOSE THE DOOR! First, notice above that our integrated fridge freezer came with hole markers where to fit the door slider attachments. Combination of beech and pine timber construction means our staircase is stronger, more robust and has greater durability than inferior alternatives on the market So, to cheat around this, I would either create new holes on the plate or on the edge of the fridge door itself. Again, using a 2mm drill bit.Treads connected to the side of the ladder by a dovetail joint, for ultimate strength and rigidity – inferior models are only screwed in place, making them weaker In our case, someone we know fitted the majority of our appliances, but hadn't finished this job. And after the fridge freezer door slider attachments had been thrown in a box with other stuff, we didn't know what we were looking for. And the instructions were nowhere to be seen. REPLACEMENT INTEGRATED FRIDGE FREEZER DOOR SLIDER As you can see below, the replacement latch's holes didn't match the small indents on the edge of the door.

And after slotting the latch on the longer strip, I predrilled two more 2mm drill holes before screwing.For two to three years, we have never had an integrated fridge freezer door slider attached. And the reason being, they're INCREDIBLY hard to find online if you don't know what they're called. So, I make it my mission to show you what to buy and how to fit it. With the assistance of our PLC experienced Board, we have invested significantly in our manufacturing, design and supply chain capabilities – allowing us to offer world leading engineered products directly to global OEMs and our very wide customer base. We are a trusted and approved supplier to a range of industries including Aerospace, Defence, Automotive, Train, Electronics and Machine Building. We are in effect a one stop shop in linear motion with global reach.