HPI Ready-To-Run vehicles bring you the same high performance and quality that you’d expect from a high end RC kit but with the added convenience of being factory pre-assembled to the highest standards – giving you a high performance RC car straight from the box! If you don’t want to make any changes and just get out and drive, that’s fine too! Absolutely everything is factory-fitted right out of the box, so you don’t have to change a thing if you want to just start up the Trophy 3.5 and have some fun. Building on the success of the HPI Trophy Truggy, the HPI Trophy Flux brings brushless power to the renowned HPI platform! The car is your typical 1/8 scale buggy design with 3 gear differentials that can be filled with different diff oils to change the handling of the buggy. This drive train design has also proven to be near built proof over many years. Examine the drive shafts for wear and replace as required. If possible, change them for titanium. The steel shafts wear and bend too easily.

I have had the use of a starterbox to help the break in process ( on the 4th tank atm) but didn't have to use it from tank 3 as she fired up on just the pull start (be it after the 10th, 15th pull) test will be if she fires up again now after 3-4 day break without the starterbox.

Suspension and Steering

If you have lost your manual, then you can find online versions here for any HPI product: http://www.hpieurope...ons.php?lang=en The chassis of the HPI Racing Trophy 3.5 Buggy is also made of aluminum, providing stability and durability during intense races. It features a built-in servo, which enhances the responsiveness of the vehicle to the user's commands.

as for race rollers, it depends who you ask. Losi 8ight's and 8ight 2.0 are most common everywere iv race. Iv owned and raced a losi 8ight, but poersonally it didnt suit me, also losi suffer from the classic losi wobble were everything wobbles lol meaning bits need replacing frequently. Originally we were just for the Trophy 4.6 Truggy, but as the Trophy 3.5 Buggy is so similar, we let them in too!! And HPI are also releasing electric versions of the cars, who are going to be welcome here!! To increase the chassis stiffness, it’s fitted with metal rod braces front and rear – this allows the suspension to do all the work it’s designed to do for improveed driving feel and control without chassis twist or bending getting in the way. The awesome HPI Trophy buggy has just been refreshed with glitch free 2.4Ghz radio gear and waterproof electronics!

This service does not deliver on a Saturday or Sunday. If you would like Saturday delivery please call us on 01782 409310.

The HPI Trophy range of off-road racers has been updated with the latest in 2.4GHz radio technology, waterproof servos and a waterproof receiver & battery compartment! That's right: one of our most popular nitro kits ever now has been upgraded to make it a performer just about anywhere! Ready to go straight from the box, just charge up your batteries and youre ready to crush the opposition!larger the engine normally results in more power, however that power is deturmind by the throttle curve i.e low end, high end... middle ect. Thats determind by the ports. There are essentially three reasons you might want to buy a used HPI Trophy 3.5 Nitro Buggy; you may be a collector, looking to restore and display it; restore and sell for a profit; or simply restore and race an iconic vintage model. Personally, I used to get a buzz out of restoring an old clapped-out model, installing modern day electrics and maybe a few hop-ups, then showing the gang at our local club, just how competitive those old models could still be. The HPI Trophy range of off-road racers has been updated with the latest in 2.4GHz radio technology, waterproof servos and a waterproof receiver & battery compartment! That’s right: one of our most popular nitro kits ever now has been upgraded to make it a performer just about anywhere! Although pull starts are a pain because they brake often enough, it is the lighest choice. And you can buy 1 or 2 spare pull starts and when they brake, you immediately replace with a good one and repair the bad one for next time. a 4.6 .28 engine will fit in the trophy with ease. (just liek the hypers with .28 engines ect) and will handle the extra power, but its weather you can

If youre looking for an entry into the exciting world of nitro Radio Control, then look no further than the HPI Trophy. Powered by the impressive HPI F3.5 engine and with a striking new paint scheme, the HPI Trophy buggy looks as fast as it is! Thanks for that DLD, I am swayed by a starter box and thinking about it were I plan to drive around to I will need to drive there so power isn't an issue really.Equipped with a nitro engine, the HPI Racing Trophy 3.5 Buggy delivers high-speed action and exhilarating acceleration. Its 2.4 GHz frequency band ensures a reliable and uninterrupted connection with the remote control, allowing for precise control even in crowded areas. Additionally, this radio controlled toy is water resistant, offering protection against unexpected splashes or wet conditions. That's right, one of our most popular nitro kits ever now has been upgraded to make it a performer just about anywhere! The Trophy 3.5v2 buggy is the perfect way to get into nitro 1/8 buggies! Please note: This HPI vehicle is designed to provide water protection so it can be driven in wet conditions (e.g. rain, snow, puddles). Not for submersion. Nitro engines are splash protected and require extra care when running in wet conditions. See manual for details. When I first showed up to test out the HPI Racing Trophy 3.5 buggy I was greeted with a nice surprise. The first thing I noticed was a very well built vehicle that looked much more like a race buggy than your typical “drive around and have fun” buggy. The fact is, if not for a pre-printed body, and a pull start engine you could easily mistake the Trophy 3.5 for a full on race buggy.