Although paint correction on a fully decontaminated surface is the main course in approving the aesthetics of your paint, I have noticed an amplification in the look of the paint after using CanCoat. Gyeon CanCoat has the ‘glass like gloss’ look a coating provides as seen below with this Audi RS5. Q² CanCoat EVO offers more durable performance, improved visual enhancement and hydrophobic properties - all thanks to the updated EVO formula. It remains as easy to apply as it used to, now featuring even easier wipe off. Applied can coat at the weekend . Full paint cleanse and machine polish . I used Bilt hamber paint cleanser. Not sure if I should have splashed out on Gyeon prep. Anyway I then applied can coat . left 2 hrs and applied second coat . GYEON do not clarify the circumstances in which it should be used, looking at the above 'each time you wash' would suggest that it is a shampoo for regular use. If you do use it regularly, you can guarantee the car isn't being fully de-contaminated making that contamination harder to remove without polishing (not possible without removing the coating too).

Bad news is that about 15 hrs after applying it started to rain a little and 24 hrs after the second coat the rain got heavier. I was hoping for 24 hrs without rain to allow it to fully cure.Gyeon claims that Can Coat should be fully cured within 24 hours and it is best to avoid strong chemicals during the first week after application. Can Coat may be topped with Gyeon Cure if you wish. I recommend removing the sprayer from the bottle and cleaning it out with water after each use so you can re-use it. Store the bottle in a cool area with the cap secured in between uses. Developed over the course of two years by some of the world's leading car care experts, Q2 Cancoat EVO also offers an easier wipe-off process, and improved flexibility for the conditions in which it can be applied. Like the other coatings in the EVO lineup, it can be applied outdoors, making this a great option for driveway detailers and mobile detailers around the world.

It still retains that versatility while making for an excellent choice for a maintenance topper a year down the road on a coating. It works with any coating. Gyeon Q² Can Coat EVO is the easiest coating to apply you will experience. It is also the best value for money product to protect or maintain your ceramic coated car. Its 200ml size allows you to coat or re-apply it over 10 to 15 times! CanCoat has always been one of may favorite products. I would go on a limb and often state it was the best coating in the Gyeon line even if was not a full fledged coating. It had a claim of up to 6 months but it consistently exceeded in durability and longevity for me ranging from15-18 months. It is also one of the most versatile coatings as it can be applied to any surface (glass, paint, trim, wheels) as a standalone but also as a maintenance topper after a year or so. It also has some of the best hydrophobic behavior that I have seen and it leaves that glossy appearance. I used CSL topped w/ C2V3 on a vehicle, applied January 2017 and it was among the poorest at self cleaning among the many coatings I have tried; it rained, it needed washing. The base CSL significantly improved in this area after a month or two, likely when the C2V3 application wore off. After 8 months and 20k+ miles, the CSL was doing alright but CSL alone is not really noted for its extensively entertaining water behavior so I was looking for something to maintain the richness of the base CSL look (which I liked) but wanted something a bit more long lasting than a standard topper/booster to improve the self cleaning/hydrophobic behavior….so I topped it with a layer of CanCoat, which totally transformed the performance of the CSL in a definitely positive manner. The CanCoat added a bit of pleasing to me candy-gloss pop to the CSL and CanCoat has great hydrophobic/self-cleaning characteristics which it lent to the overall performance of the vehicle. If you still have an older bottle of CanCoat, don't get rid of it. Use it as it is a great product. Once it is all used up then transition over to the Evo version.I made some fundamental errors during my first attempt at using Can Coat. Since I had associated the product with other coatings, I treated it like a normal coating application. I sprayed the product onto a microfiber applicator and then spread the coating onto a section of the paint using overlapping, cross-hatch motions. I then wiped the residue away and moved on to the next section. This was easy enough, though I did notice some residual product or light streaking from time to time that required additional attention to completely remove. As I continued to work I began to understand that with this product, less is more. Over application provided no benefit. It just took more time, created more work, and made for a more stressful process.

However, I have discovered a more effective way of applying the product which improves the performance and durability. Here’s how: Method 2 I have heard of some individuals using CanCoat as a drying aid, with even less durability being the tradeoff. Although I have not personally pushed this product to those limits yet, it is a testament to the versatility of this product. Q² CanCoat EVO is the easiest coating to apply you will experience. It is also the best value for money product to protect or maintain your ceramic coated car. Its 200ml allows you to coat or re-apply it over 10 to 15 times! DURABLE HYDROPHOBIC PROPERTIES Q² CanCoat EVO offers more durable performance, improved visual enhancement and hydrophobic properties - all thanks to the updated EVO formula. It remains as easy to apply as it used to, now featuring even easier wipe off.I want to start by saying Gyeon recently released its Evo line, which includes a seemingly improved formulation of CanCoat. But for the sake of this discussion I will only mention the original formula. One thing that is interesting is that CanCoat does indeed harden but it hardens into a white powdered silica which is cool. It can be seen in the sprayer as well. I know many have had issues with the sprayers fail even after rinsing but for me I am still on the original sprayer. I rinse it with hot water and pump hot water through it. However, after a drive in the wet a couple of days later, the rear of the car was just as dirty as ever and although there was beading, a lot of those beads later dried to leave horrible, dirty, water spots. Leaving the car out in the rain a few days later and the beads were still there but again they later dried to dirty water spots. EASY & EFFICIENT Q² CanCoat EVO is the easiest coating to apply you will experience. It is also the best value for money product to protect or maintain your ceramic coated car. Its 200ml allows you to coat or re-apply it over 10 to 15 times!