There are a handful of styles of ratcheting screwdrivers, so the results of our tests and this comprehensive guide let you know what’s out there before you start shopping. The main difference in style is how each screwdriver stores its interchangeable bits. There are benefits to each style, so it’s worth giving some consideration. Bits in the Handle The most common style of ratcheting screwdriver stores its bits inside the grip. Often, there is a cap that threads on and off or pops out of the handle, providing access to the driver bits. Multiple bits clip to a removable ring, allowing you to choose the appropriate bit or store it away securely. Other models have bit-clips built into the cap. When it comes to really cranking down on a fastener, the Megapro ratcheting screwdriver has all the grip you could need. This ratcheting screwdriver’s shaft doubles as a ¼-inch nut driver, and it comes with 12 bits (six double-ended bits), including four Phillips bits, two square drive bits, two slotted bits, and four Torx bits. Screwdrivers are essential pieces of kit, used by DIYers and professionals alike. Ratcheting systems give you a mechanical advantage and make the job much easier to complete.

Ratchets are great and save you a lot of time, but the best ratchet screwdriver, like the Wera Kraftform, will have a switch to change direction without removing the tool from the screw. The Wera ratcheting screwdriver feels solid in the hand, and one of the first things we noticed was its nonslip, ergonomic grip that’s contoured to help the user get a firm grasp. The bit storage base slid out easily with just a light push of the button on the bottom, making it easy to select the bits. We inserted screws in pine, ash, and walnut boards, and the screwdriver held up to all densities. When shopping for the best ratcheting screwdriver, you may need to choose between a kit and a single screwdriver. When looking for the best ratcheting screwdriver, notice they come in different lengths. Standard-length models are around 7 or 8 inches. Stubby models are under 3 or 4 inches. You can also find longer models with long shafts and handles over 9 inches long.If you’re still a little twisted up about buying the best ratcheting screwdriver, the following section will help. It includes some of the most frequently asked questions and answers about ratcheting screwdrivers. Q. How does a ratcheting screwdriver work? The Wera comes with six bits, including two Phillips-head bits, two square drivers, and two slotted drivers. The shaft also doubles as a ¼-inch nut driver. pieces Bits: PH 1, PH 2, PH 3, PZ 1, PZ 2, T-10, T-15, T-20, T-25, T-27, T-30, T-40, SL 4.0, SL 5.0, SL 5.5, SL 6.0, ¼”SL Each of the ratcheting screwdrivers we tested was pushed to its limits so we could get a good idea of how it would perform over time and in various situations. With each tool, we inserted screws into three types of wood—pine, ash, and walnut—to see whether the ratcheting action would stand up to the different densities. Slide tray that keeps 6 different bits handy and secure: PH 1, PH 2, PZ 1, PZ 2, slotted 4,5 and 5,5

Not all screwdrivers will have their torque rating clearly displayed, but durable models can handle around 50 newton meters (nm) or about 36 foot-pounds of torque. Taking a screwdriver beyond its torque capacity will usually break the pawl or shave teeth off the ratcheting gear, making the screwdriver useless. Length We found the Megapro well suited for use by those with large hands. Its handle features rubber inserts and is comfortable to grip, but it might be a little large for someone with smaller hands. The end cap slides out for easy bit retrieval, and the double-ended bits make it handy to find the right bit without needing to carry extra bits around. The directional collar is easy to switch, and the ratcheting action is smooth.The benefit of storing the bits in the handle is that it’s harder to lose them. As long as the cap stays shut, the bits are secure, even if they pop out of their clips. The downside is that switching between bits stored in the handle does create some downtime. Also, these bits are often smaller and harder to grip. Bits on the Handle The directional collar on the Bahco switches directions smoothly, and the screwdriver’s ratcheting action is smooth. We inserted screws into pine, ash, and walnut boards, and the Bahco didn’t miss a beat, even when we exerted force. There’s a tiny bit of play in the shaft, which we would have preferred not to be there, but it wasn’t enough to affect the tool’s performance. Smooth ratcheting stroke, three position ratchet mechanism: forward, reverse and neutral next pawl tooth As opposed to storing your bits inside the handle, several models come with storage on the handle. These models have slots or holes for holding the bits right in the grip. They either clip into place or slide in from the bottom of the handle. We used the Williams screwdriver to insert screws in a variety of wood types, and its ratcheting action remained smooth and sure—even when we used force. The directional collar switches with ease, and the shaft head features a magnet that holds bits in place. The long, thin design of this screwdriver is well suited to reaching fasteners in tight spots while exerting pressure.

Don’t expect frills or extras with the Williams T-Handle Ratcheting Screwdriver, because you won’t find any. What you will find is a solid screwdriver that comes with a long shaft and accepts standard ¼-inch bits. It comes with just one Phillips-head bit. On the larger Klein Tools screwdriver, using strong force to insert a screw into a walnut board was more than it could take, and the ratcheting mechanism broke. We used the Megapro to insert screws in pine, ash, and walnut boards, and then we tested it on removing stubborn screws. It stood up to strong twisting force, and the ratcheting action didn’t slip or break. We used quite a bit of torque. If we could ask for one thing to be different it would be a magnet in the head—when we turned the screwdriver downward, the bits often fell out. The screwdriver has a collar direction adjustment, as well as a lanyard hole for a wrist strap or hanging cord. However, it doesn’t have any onboard storage, so you should keep the case on hand for easy access to bits. The benefit of ratcheting screwdrivers is that you can get a firm grip on their handle and apply plenty of torque repetitively without adjusting your grip. Not all screwdrivers handle torque as well as others, so try to find a robust, durable model.A single screwdriver is a far more streamlined tool than a ratcheting screwdriver kit. The bits all fit inside or on the handle, allowing you to keep everything with you. The issue is that you simply won’t get as many bits as you would with a kit. Also, when storing all of those bits on board, single ratcheting screwdrivers tend to be heavier. Ratcheting Mechanism By simultaneously depressing the two buttons on either side of the handle, we were able to eject the storage tray that comes with six bits—two slotted and four Phillips head. The shaft comes with a magnetic head that holds the bits securely. teeth ratcheting screwdriver which permits smooth operation and minimum rotation arc to catch the next pawl tooth We tested the Workpro by inserting screws in a variety of wood types, and it came through with flying colors—even when we used maximum force and dense walnut wood. We then tested the tool on a range of fasteners and found the bits are well made and appear to be hardened steel. Most ratcheting screwdrivers use a gear-and-pawl system. Depending on the direction you set the screwdriver to, the pawl will engage with the gear, forcing the tip to rotate with the handle. When you twist the screwdriver in the other direction, the pawl skips over the gear’s teeth, rotating the grip independently of the tip.