Access must be suitable for lorries which will be 3.5 tonne 7.5 tonne or 14 tonne lorries (7.5 tonne being similar to average refuse collection lorry) We hope you found this post on how to treat and finish weathered wood interesting. If you have any other advice or top tips, please feel free to leave them in the comments below. We love hearing from you! Once the timber is saturated, brush out or wipe up any excess that has not penetrated to avoid shiny spots Textrol should be applied ‘wet-on-wet’ meaning that you should not allow it to dry in between coats Apply a second coat of Textrol in the same way as the first. Again allow to soak in for 15-30 minutes.

A small trellis added to the top of an existing fence and provide a deterrent for trespassers and burglars as they will not hold the weight of a person and so would collapse – causing noise and damagePaintWell increased its Industrial Paints offering with the acquisition of Promain UK Limited, the preferred UK distributor for many of the world’s leading paint and surface coatings manufacturers. Clean all tools and equipment with white sprits whilst still wet. If allowed to dry, remove with paint stripper.

Sand seen face with 60 - 80 grit paper in the direction of the grain ideally with a belt sander to remove 'millglaze' (millglaze is the compacted fibres on the surface caused by the machining process, millglaze needs to removed otherwise the oil wont penetrate correctly) Actual coverage will vary depending on application method, type, texture, age and porosity of the wood. Unlike other species, Yellow Balau has no specific ‘grading rule book’ and generally is sourced on the trust basis that certain mills produce a superior production selecting out lower grade boards for other uses. We use our considerable experience to source from the best shippers and to the specification that we believe is the best in the UK. Galette's highlights occurred early in camp before the hamstring injury flared up. cheap china jerseys Given that it has been so long since he has played, the coaching staff places more value in seeing Galette play in the preseason than, say, tight end Jordan Reed, who missed almost cheap nfl jerseys the first month with a toe injury.

33 reviews for Textrol

per litre; actual coverage will vary depending on application method, type, texture, age and porosity of the wood. Application Textrol HES is a one-coat, penetrating oil finish for softwoods and European hardwoods. It has been developed to penetrate deep in to the wood with a high solids content which protects the timber against damage caused by the weather and UV rays.

They can be attached to the side of existing fencing to provide a place for climbing plants to be trained, creating a softer finishIf you are looking for a finish that brings life to older wood and allows the wood to shine through then Textrol is perfect for doing just that. It is also great if you are looking for protection from the effects of moisture, UV rays and weathering. Apply a single liberal application of Textrol HES working in the direction of the grain. After 15-30 minutes brush out any excess to improve penetration and give a uniform finish. Please Note swatches are given as a guide only and are based on use for light coloured softwoods. Actual colour will depend on the type and age of the wood surface treated. Always test a sample first before coating the entire surface. Surface Preparation New wood surfaces

Note: Any rags etc. soaked in Owatrol Textrol HES may spontaneously catch fire if improperly discarded. Rags etc. must be saturated with water after use or placed in a sealed, water filled metal container, before disposing with household waste. Millglaze is the compacted surface which occurs during the machining process. The heat from the cutters draws natural oil in the timber to the surface compacting the fibres and creating a hard slightly shiny surface which will prevent an oil finish from penetrating as intended. It was not easy to put on as it is runny but we had prepared with tarpaulins etc. We found that we only needed a small amount on the roller which we then brushed out whilst the surfaces were still wet. The coverage was fantastic and we are very pleased with the result. The uneven colour is due to the different woods being used. I would like to add photos but there does not seem to be that option. Textrol HES has a luxurious matt-sheen finish which enhances the grain and natural beauty of the wood. As it is penetrative and its place is not on the surface it will not peel or flake as it doesn’t form a film. Why use Textrol HES? After cleaning and/or stripping, allow the wood to dry for 2-3 good drying days or until it has reached a moisture content of 18% or less before applying the finish.

Protect your fence with Deks Olje D1

If you are collecting timber products please collect at the time bookedi.e. 9am collection would be 9am > 9:45am, this helps us have the product ready for your slot and reduces customer congestion. Treat new wood with Owatrol Seasonite and allow to weather for 12 months. Weathered Wood (Wood exposed to weathering for longer than 12 months) should be treated with Net-trol Wood Cleaner & Colour Restorer, following instructions on the container. Please consultManufacturers Product Data Sheetbefore application. Features Textrol may only be applied to bare wood surfaces or a weathered wood that was previously finished with Textrol. All other oils or sealers must be completely and thoroughly removed with a wood oil remover such as Owatrol’s Aquanett and then the surface must be cleaned and neutralised with Net-Trol before applying Textrol. If necessary sand the surface after cleaning and stripping (80 grit paper). After cleaning, allow the wood to dry for 2-3 days before finishing. Previously coated surfaces