The names of the settings might be different depending on which slicer you use (eg. Chitubox, Lychee, PrusaSlicer etc.) Perhaps you do not have a clear conception of the change in size. Just imagine you just can print phone holders, small decorations, or toys before, but now you can print tall statues, dinosaurs, and even complex architectural modeling. Light off delay: The amount of time the curing light will be off for between each layer. This helps resin spread out evenly after the build plate moves up, and helps cool down the LCD screen. However, by default, the plate movements are not very fast (50mm), so this will slow down your prints, for my part I replaced the lifting speed and base lifting speed values at 100mm. The following settings have been crowdsourced from community forums, manufacturers, Maker Trainer users etc.

You can think of it like a bottle of pulpy orange juice. You need to shake it well to get all the juicy bits that have sunk to the bottom.

Use Cases

Creality LD-002H costs only 1-4s to print each layer, and it uses an LCD HD screen with enhanced transparency, increasing speed up 10% to LD-002R resin 3d printer. LD series specializes in resin 3D printing, and they are usually applied to the manufacturing industry because of its high precision. If you are looking for a specific resin, but cannot find it here, try the Master MSLA printer settings spreadsheet. You might find its settings for another printer, which should still be helpful.

It takes 6 to 18 seconds for the Creality LD-002R 3d printer to print each layer. So if your son is waiting eagerly to have a new toy, or you want to produce more products for your company, the LD-002H resin 3d printer is a good choice. You can search the table for a certain property you are interested in, such as "red" or "flexible." You could also try looking for a resin with a low curing time, or one with multiple upvotes. Besides, it features an upgraded UV light source module and improved transmission system for superior light permeability, which greatly reduces the printing time and provides a more uniform light exposure of 8000uW/cm², increasing the printer’s performance while providing you with a smooth and reliable resin 3D printing experience.

Creality offers two MSLA resin 3D printers in the LD-002X family; the LD-002R, the subject of this review, and the LD-002H. The primary difference between the two is the LCD used for masking; the LD-002R uses a 5.5” RGB LCD screen which requires a longer exposure time while the LD-002H uses a 6.08” inch Mono LCD which can make layers at almost four times the speed. Mono LCD screens allow more of the UV exposure to reach the vat, which greatly reduces the amount of time required to cure each layer. The spreadsheet is not a substitute for resin validation, but a good starting point for it, allowing you to build on what others have already worked out. Here is my very first print, with an exposure time of 2sec per layer. The rendering is really clean.

There are some factors that greatly influence your printing success no matter what material you choose.So the LD-002H resin 3d printer adopted 1620*2560 higher resolution with higher precision. Now the machine is able to manifest every detail of the model to us. This satisfies your needs for higher-quality products. The Creality LD-002H has been equipped with a robust monochrome LCD screen that, compared with its RGB analogs, offers four times their service life and is considerably less power hungry. The temperature of your resin should be at a minimum of 20°C when printing, and ideally over 25°C. You can either make sure your room temperature is within this range, heat the printer or pre-heat the resin before pouring it into the vat. Here comes the good news. The new print LD-002H adopts an upgraded UV Light Source Module and an upgraded transmission system. Compared to the LD-002R resin 3d printer, it greatly improved the stability of the light source and the success rate of printing. Resin 3D printing is great, with a much better print quality and level of detail than a filament FDM printer, but you will need to spend some time cleaning your parts, either with IPA alcohol, or with water if you use waterwashable resin.

The Creality LD-002H boasts its stable and reliable Z-axis linear rail with a steady mechanical structure to ensure minimum to none layer shifting, resulting in a high Z-axis precision that helps you output millimeter-precise prints in a highly reliable and consistent fashion. Easy Leveling System: Simply lower the printing platform atop an ordinary piece of paper. Then hand tighten the leveling nut to complete the leaving process. Z-axis Linear Rail: The linear rail provides a much stronger structural mechanism for the Z-axis, resulting in better, more refined prints. If you're new to resin printing, you might be wondering what some of the terms in the spreadsheet mean.

Applications

I had the chance to test this new Creality LD-002H printer among the first ones, I had already been pleasantly surprised by the old 2R version, and it is also the case for this 2H.