T-Cut Colour Fast – Removes minor scratches, scuffs and marks, all whilst adding colour, in one simple application. We then washed where each set of scratches were with car shampoo and warm water, either until the scratches reappeared or a maximum of five times. Step 3: Rub the T-Cut over the scratch with a steady and firm hand, ensuring you move the cloth in a circular motion. Do not be alarmed if your clothes change colour, as it is only due to the top layer of paint coming off.

To understand the different types of scratches, you also need to know about the layers that make up a car panel on most cars: There are three types of scratches that can affect a car panel: shallow or surface scratches, medium or basecoat scratches and deep scratches.Which? Limited is registered in England and Wales to 2 Marylebone Road, London NW1 4DF, company number 00677665 and is an Introducer Appointed Representative of the following: Here at ChipsAway we are experts in car scratch repair, and we can repair scratches that tcut usually won’t touch. Our speciality is offering an affordable and convenient service that gets your car sparkling in no time. With experts positioned and poised up and down the country, we have specialists near you. Free, No-obligation Repair Estimate In this article, we’ll explore T-Cut in more detail, discussing where it is best used and whether it can do any damage to your car’s paintwork. What is T-Cut? T-Cut Colour Fast is perfect for restoring the original colour of your car, while T-Cut Rapid Scratch Remover is a favourite for handling light scratches. If you’re dealing with metallic paintwork, then T-Cut Metallic Colour Restorer is your go-to. For those with stainless steel, Tetrosyl Cutting Oil will be your best friend. Instructions for Using T-Cut on Your Car’s Paint

The T in Tcut stands for “ Tetrosyl Cutting Oil ”. How T-Cut works What is the car scratch remover good for?Step 1: An important action to ensure you carry out, is to thoroughly clean and dry the area of paint you are applying the T-Cut to, or else it could potentially damage the paintwork. Regardless of what type of car paintwork you have, T-cut can be used. For some additional uses, it is suitable for our boats, caravans and around the housework. How To Use T-Cut Correctly

Avoidable errors can hinder the effectiveness of T-Cut or even result in additional damage to the paintwork. One common mistake is applying T-Cut on unsuitable surfaces, such as matte finishes or non-metallic paintwork, leading to discoloration or accidental damage. Another error is impatience, where the product isn’t given sufficient time to penetrate the scratches before it’s buffed off. Know Your Surface

Common Mistakes to Avoid

Allow this to dry, then apply a clear top coat to seal it in. The top coat can easily remove the base, so be careful at this stage.

After the application, give the T-Cut Solution time to work its magic. Allow the product to penetrate the scratches, and once dry, use a clean microfibre cloth to buff it off, revealing your car’s refreshed original shine. Tips for Effective Use Deeper Scratches: Whilst it is good for slight, surface scratches, it’s not as suitable for scratches that are deeply ingrained in the paintwork, either accidentally created by scraping against a wall or curb, or deliberately caused by a vandal (if your car is ‘keyed’). The next step is to put on a pair of gloves and apply tcut to a clean cloth – something without fluffy fibres. The reason for this is the fibres can break off into the T-Cut solution, and this can also mark the paint. Applying T-Cut We also pitted WD40 against the same rigorous set of tests to see how it did as a car scratch remover. Most shallow and medium scratches can be quite hard to tell apart. If you spot a scratch on your car, pass your fingernail over the mark. If your fingernail gets caught, this is a medium scratch at the very least.Effective use of T-Cut isn’t just about the application; it’s also about choosing the right product for your specific needs and observing safety precautions. Choosing the Right Product Yes, T-Cut can be used on all paint colours. However, certain products, like T-Cut Colour Fast, come in different versions to better match a range of paint colours. How Often Should I Use T-Cut on My Car? Yes, T-Cut can be used to improve headlight clarity and light visibility by removing haziness from clear, plastic headlights. It can also be used on window and plastic glass to improve clarity and add shine. To do so though, ensure you buy the right version of T-Cut. Coloured versions will not help with restoring headlights, for obvious reasons. Can it remove excess lacquer? Nanoparticles enhance T-Cut technology, allowing for easy application and excellent outcomes. Features & Benefits: