The cured material can be planed, chiselled, drilled, and worked with carpenters’ tools in the same manner as wood -with the added advantage of constancy in carving as there is an absence of grain and knots.

High “wet grab” or tack of PC-7 Paste Epoxy makes overhead and sidewall work easy without drip or sag. Like epoxy itself, our pigment pastes are fairly sensitive to temperature when it comes to their viscosity. Mild steel and other metallic substrates shall be degreased, power wire brushed or grit blasted and vacuumed free from dust. Filling or filleting tight corners or complex details on moulds before laminating with compatible epoxy resin and reinforcement.The handy pack comprises two small containers similar in size to the old 35 mm camera film canisters. With a 3:1 mixing ratio the cured product gives excellent mechanical strength and is easily machinable and ideal for metallic surfaces. I used this filler to repair holes and cracks in my asphalt floor which were caused by carpet gripper rods.

Are there any specific things to take into account when combining these products and what % of colour would you recommend?Can be used to repair everything from the finest crack in an engine block to a cold weld repair of steel plate. The ratings/reviews displayed here may not be representative of every listing on this page, or of every review for these listings.