Intel HD4000 and HD5000 series graphics controllers with modern Windows 10 and Windows 11 releases may be limited to 4K 30Hz when using a DisplayPort to HDMI adapter, however may still support 4K 60Hz with a direct DisplayPort connection. This Adapter is ideal for use with any DisplayPort video output that you want to convert to HDMI, such as an HDMI monitor or TV. The HDMI2DP DVI or HDMI® to DisplayPort® Converter converts an HDMI, DVI or Mini DVI input signal into a DisplayPort (or Mini DisplayPort) output, eliminating the cost of upgrading your source device hardware or purchasing a new display. This HDMI / DVI to DisplayPort® active converter is the perfect solution for converting an HDMI or DVI signal to work with any DisplayPort® display.

For assistance with service selection, planning and scheduling, contact an Eaton Service Specialist. The HDMI to DisplayPort Adapter Converter is the perfect solution for connecting devices with an HDMI output to a display with a DisplayPort input. We're always available to help with questions, including product selection, sizing, installation and product customization. This appears to be an issue with the discontinued Intel graphics drivers (last updated by Intel in 2015) and Windows releases after about 2018. DisplayPort uses packet-based data transmission, breaking the video stream into individual packets of data allows for longer cable runs, use in both copper and fiber-optic cables, and allows for higher bandwidth than other video formats.Most DisplayPort to HDMI cables and adapters are one-way adapters from a DisplayPort Source (computer or docking station) to a HDMI Sink (television, computer monitor, or projector). Closing the lid should no longer put the computer into sleep mode when an external display and power source is connected, instead one of the external displays should now become the Primary display with the desktop icons instead of the laptop's built-in display. In other words, passive adapters do not work when connected to a regular DisplayPort port (only supported through a DP++ port). Next Working Day applies to UK mainland addresses only and excludes Saturday, Sunday and Bank Holidays. Simply connect your HDMI or DVI equipment to a DisplayPort® enabled device in boardrooms, hotel rooms, in the office, or at home.

Active adapters use additional chips to make the conversion inside the adapter, regardless of whether the source supports DP++. HDMI uses a video signal, similar to DVI, this requires more power to operate at the same cable lengths as DisplayPort and requires significantly more processing power to create DisplayPort packet-based data. The Plugable adapter supports resolutions up to 4K (3840x2160) 60Hz on displays with Standard Dynamic Range (SDR), and 4K 30Hz with High Dynamic Range (HDR) capable displays. This is due to how the two graphics controllers share the output port, the Intel graphics controller generally controls the port and "passes" through video data from the second graphics controller, limitations on Display detection and maximum resolution are set by the Intel graphics driver.Cisco makes no warranties, express or implied, with respect to Eaton's product or its interoperation with the listed Cisco product(s) and disclaims any implied warranties of merchantability, fitness for a particular use, or against infringement. The StarTech HDMI2DP HDMI or DVI to DisplayPort® Active Video Converter allows for seamless active conversion from an HDMI or DVI source to a DisplayPort® destination.

When connected to an HDR television, the television will attempt to enable HDR over the connection even though it is not supported causing reduced refresh rate or image quality. In addition, our audio and video department features top-quality supplies for your home cinema system.You can use your DisplayPort device everywhere and this adapter will allow you to output an HDMI or DVI signal from your DisplayPort® device.

Connecting these type of cables backwards will not allow an HDMI output port (such as those on a dock) to function with a DisplayPort input on a monitor.If the source does not support DP++, then you must use an active converter, which includes additional chips to perform the conversion. The Lindy DisplayPort to HDMI Converter is a high performance solution that allows a DisplayPort source device to be connected to a HDMI display or projector. With the Plugable DisplayPort to HDMI Active Adapter (DP-HDMI), convert the DisplayPort output on your device–laptop, desktop, tablet, docking station–to HDMI. Many of our newer docking stations include both HDMI and DisplayPort outputs to reduce the need for additional adapters or adapter cables. We supply the latest technology solutions to organisations of all sizes across education, public and private sectors, helping thousands of organisations along their own digital transformation journeys.